OEM/ODM Corrosion-resistant Tungsten Carbide Shaft Sleeve for Submersible Pump 
Tungsten carbide shaft sleeves,also called carbide bushes, which are with good wear resistance, high machining accuracy and high impact strenght, are widely used in water, slurry, oil and other high corrosion and corrosion resistance pumps.
The specification we can make is OD 10~ 400, ID 3~ 300 and H 8~ 200 mm.We can make various tungsten carbide bushes with complicated shapes. Either blanks or finished products can be provided.
There are many tungsten carbide bush specifications and grades.Oston Carbide could also supply carbide shaft sleeves according to your requirementts.
| Grade | Density (g/cm³) | T.R.S. (MPa) |
Performance & application recommended |
| YG6A | 14.95 | 1800 |
Fine grain alloy, good wear resistance. Semi-finishing of chilled cast iron, non-ferrous metals alloys, semi-finishing and finishing of hardened steel, alloy steel. |
| YG8 | 14.8 | 2020 |
High strength in use, impact and shock resistance higher than YG6, but wear resistance and cutting speed comparatively lower |
| YN8 | 14.7 | 2000 | Corrossion Resistant, widle used in chemical and petrol oil pumps |
| YG10 | 14.5 | 2400 |
High strength in use, impact and shock resistance higher than YG6, but wear resistance and cutting speed comparatively lower.Roughing of cast irons, nonferrous metals and their alloys as well as non metallic materials at low cutting speed. |
| YL10.2 | 14.5 | 2400 | Fine grain alloy, good wear resistance. Used for processing hard wood, veneer board, PCB, PVC and metals. |
| YG15 | 14.2 | 2900 | Conventional wear resistance, high bending strength,used for steel alloy etc. |
